This is a very Simple Trick.
Just Dial *800*79# and you will get 100 MB Data/15 days .
Thats It !
Trick is Tested and 100% working in Gujrat and Rajasthan .Please Check in other States too
Working In Gujrat Only
Idea Free 3G Tricks
This is a very Simple Trick.
Just Dial *800*79# and you will get 100 MB Data/15 days .
Thats It !
Trick is Tested and 100% working in Gujrat and Rajasthan .Please Check in other States too
Working In Gujrat Only
Free Call Tricks
Hiii Frends Now You Can Call Any Mobile No Totaly Free From Your Airtel Prepaid....
1)Just Dial 560606 or 56060
2)Press 321 & Then After Single Beep
3)Dial No U Want To Call. Then Remembr U Can Call Unlimited Nd Twice For Some Nos N Der is No Limit For Call Duration........Remembr Using This Tricks U Can Not Call Any Relience No..
1)Just Dial 560606 or 56060
2)Press 321 & Then After Single Beep
3)Dial No U Want To Call. Then Remembr U Can Call Unlimited Nd Twice For Some Nos N Der is No Limit For Call Duration........Remembr Using This Tricks U Can Not Call Any Relience No..
Airtel Belence Transfar
Airtel Balance Transfer Trick
» Dial *141*
»select 1
»Type amount
»Type Mobile Number
»done
» Dial *141*
»select 1
»Type amount
»Type Mobile Number
»done
Airtel GPRS 3G 10 GB Free Tricks Only For India
Follow These Steps To Get 10GB Data Usage in 3G Network Tricks * SMS 3G to 121 * Reply 1 to get 3g plan info. about data plans * After sending sms you will receive following message. 1- Rs. 8 Free 10MB 2- Rs. 45, 30 Free Minutes 3- Rs. 94 Free 150MB 4- Rs. 23 Free 30MB 5- Rs. 63 Free 80MB 6- Rs.1250 Free 10GB Plan 7- Rs.101 Free 200MBPlan 8- Rs.201 Free 500MB Plan 9- Rs.451 Free 1200MB Plan 10- Rs.750 Free 4GB Plan 11- Rs.675 Free 2.5GB Plan * Now select 6 [Rs.1250 Free 10GB Plan ] * Reply 1 to conform activation of 10GB data plan After that you will Get 10GB Absolutely Free For 1 Month.You will get speed Up to 7.2Mbps. To Check Data Balance Dial *123*11#.This trick is Working In Tamilnadu & kerala checked other State.
Note- Try At Your Own Risk
Note- Try At Your Own Risk
Airtel Know Your Numbar
hii Friend...Here is the Trick to Get ur
forgotten Airtel mobile number
send a BLANK message
to:59103(free) u will get a reply
including ur airtel mobile number
like this- successfully processed
message for 919995******
Its Working
forgotten Airtel mobile number
send a BLANK message
to:59103(free) u will get a reply
including ur airtel mobile number
like this- successfully processed
message for 919995******
Its Working
NOTEPAD "world trade centre trick"
Did you know that the flight number of the plane that had hit WTC ...on9/11 was Q33N
....Open your Notepad in your computer and type the flight number i.e. Q33N... Increase
the Font Size to 72, Change the Font to Wingdings. U will be amazed by the findings.
How’s that???
....Open your Notepad in your computer and type the flight number i.e. Q33N... Increase
the Font Size to 72, Change the Font to Wingdings. U will be amazed by the findings.
How’s that???
Cute Mobile Trick
A trick for mobile Try this
1) Go 2 Write Msgs
2) put on t9 Dictionary
3) Cover D Screen with Hand
4) Press 37436304164771968
Gently Remove Ur Hand &See
1) Go 2 Write Msgs
2) put on t9 Dictionary
3) Cover D Screen with Hand
4) Press 37436304164771968
Gently Remove Ur Hand &See
Funny computer Trick
Funny Computer Trick. Check out this funny trick.
1) Copy and paste the java script code to the address bar of your browser
JavaScript: function Shw(n) {if (self.moveBy) {for (i = 35; i > 0; i--){for (j = n; j > 0; j--)
{self.moveBy(1,i);self.moveBy(i,0);self.moveBy(0,-i);self.moveBy(-i,0);} } }} Shw(6)
2) Press enter and watch your window's "shaking it". You can change
the value of i if you wish:-
1) Copy and paste the java script code to the address bar of your browser
JavaScript: function Shw(n) {if (self.moveBy) {for (i = 35; i > 0; i--){for (j = n; j > 0; j--)
{self.moveBy(1,i);self.moveBy(i,0);self.moveBy(0,-i);self.moveBy(-i,0);} } }} Shw(6)
2) Press enter and watch your window's "shaking it". You can change
the value of i if you wish:-
Making Your Windows XP genuine
This will allow you to bypass the Microsoft Genuine Validation trying this method works
better than many others I’ve tried before.
Forget the cracks and injectors etc... This is the BEST WAY:
1) start > run > "regedit" (without the quotes of course)
2) go to the key:HKEY_LOCAL_MACHINE\SOFTWARE\MICROSOFT\Windows
NT\CurrentVersion\WPAEvents\OOBETimer...and double-click on it.
Then change some of the value data to ANYTHING ELSE...delete some, add some
letters, I don't care...just change it! Now close out regedit.
3) go to start > run > "%systemroot%\system32\oobe\msoobe.exe /a" (again, don’t type
the quotes)
4) the activation screen will come up, click on register over telephone, then click on
CHANGE PRODUCT KEY, enter in this key: JG28K-H9Q7X-BH6W4-3PDCQ-6XBFJ.
Now you can dl all the updates without activating,
and the Genuine Microsoft Validation thingy won't bug you no more!!
Works with most Windows XP versions though there are some exceptions...
better than many others I’ve tried before.
Forget the cracks and injectors etc... This is the BEST WAY:
1) start > run > "regedit" (without the quotes of course)
2) go to the key:HKEY_LOCAL_MACHINE\SOFTWARE\MICROSOFT\Windows
NT\CurrentVersion\WPAEvents\OOBETimer...and double-click on it.
Then change some of the value data to ANYTHING ELSE...delete some, add some
letters, I don't care...just change it! Now close out regedit.
3) go to start > run > "%systemroot%\system32\oobe\msoobe.exe /a" (again, don’t type
the quotes)
4) the activation screen will come up, click on register over telephone, then click on
CHANGE PRODUCT KEY, enter in this key: JG28K-H9Q7X-BH6W4-3PDCQ-6XBFJ.
Now you can dl all the updates without activating,
and the Genuine Microsoft Validation thingy won't bug you no more!!
Works with most Windows XP versions though there are some exceptions...
Trick to add your favorite web site in start Menu
This is a simple trick to add your favorite web site link in START MENU
1) Right click on the Start button and select Explore
2) After Windows Explorer opens, in the right window pane, right click and select New /
Shortcut
3) In the "Type the location of the item" enter the Web Site URL you want to create.
For e.g. http://www.google.com
4) click Next
5) In the "Type a name for this shortcut:" enter a name for the link that you want to
display in the Start menu. e.g.: PC TRICKS
6) Click Finish
now clicks on the Start menu and you will see the new link you just created. Click on it
and it will open THAT website
1) Right click on the Start button and select Explore
2) After Windows Explorer opens, in the right window pane, right click and select New /
Shortcut
3) In the "Type the location of the item" enter the Web Site URL you want to create.
For e.g. http://www.google.com
4) click Next
5) In the "Type a name for this shortcut:" enter a name for the link that you want to
display in the Start menu. e.g.: PC TRICKS
6) Click Finish
now clicks on the Start menu and you will see the new link you just created. Click on it
and it will open THAT website
Locking the Desktop
This trick will lock your desktop
TRICK 1: First create a new shortcut on your desktop using a right mouse click
and enter 'rundll32.exe user32.dll, LockWorkStation’ in the location field. Name the
shortcut what ever u want to like abc. Then just double click on it and your computer will
be instantly locked
TRICK 2: The Windows key + L also do the same thing
AND THEN TO UNLOCK CLICK ON UR ACCOUNT NAME.....
TRICK 1: First create a new shortcut on your desktop using a right mouse click
and enter 'rundll32.exe user32.dll, LockWorkStation’ in the location field. Name the
shortcut what ever u want to like abc. Then just double click on it and your computer will
be instantly locked
TRICK 2: The Windows key + L also do the same thing
AND THEN TO UNLOCK CLICK ON UR ACCOUNT NAME.....
How to read the deleted messages in mobile
A SMS once deleted can’t be read again….but sometimes we hurrily delete some
important SMS
here is the technique that must be followed to retrieve deleted SMS
required utility:
1) Any system explorer or file explorer program (e.g. file man or fexplorer.provided with
the package)
Step 1) Open Fexplorer
Step 2) Select drive C: or D: depending on the memory in which the Sms messages have
been saved.
Step 3) For example u selected c: Then open “system” folder.
Step 4) then in “system” folder open “mail” folder.
Step 5) then in this folder u will see different folders (e.g. 0010001_s) and certain files
(e.g. 00100000). These files are the actual messages. Browse through every folder and
open all files till u get the sms u are looking for.
Step 6) for opening the files don’t choose options>file>open as it will show format not
supported rather choose options>file>hex/text viewer. By selecting the “Hex/ text
viewer” you will be able to open and read the deleted SMS message.
important SMS
here is the technique that must be followed to retrieve deleted SMS
required utility:
1) Any system explorer or file explorer program (e.g. file man or fexplorer.provided with
the package)
Step 1) Open Fexplorer
Step 2) Select drive C: or D: depending on the memory in which the Sms messages have
been saved.
Step 3) For example u selected c: Then open “system” folder.
Step 4) then in “system” folder open “mail” folder.
Step 5) then in this folder u will see different folders (e.g. 0010001_s) and certain files
(e.g. 00100000). These files are the actual messages. Browse through every folder and
open all files till u get the sms u are looking for.
Step 6) for opening the files don’t choose options>file>open as it will show format not
supported rather choose options>file>hex/text viewer. By selecting the “Hex/ text
viewer” you will be able to open and read the deleted SMS message.
Nokia secret codes
On the main screen type
*#06# for checking the IMEI (International Mobile Equipment Identity).
*#7780# reset to factory settings.
*#0000# to view software version.
*#2820# Bluetooth device address.
*#746025625# Sim clock allowed status.
*#62209526# - Display the MAC address of the WLAN adapter. This is available only in
the newer devices that support WLAN
#pw+1234567890+1# Shows if sim have restrictions.
*#92702689# - takes you to a secret menu where you may find some of the information
below:
1. Displays Serial Number.
2. Displays the Month and Year of Manufacture
3. Displays (if there) the date where the phone was purchased (MMYY)
4. Displays the date of the last repair - if found (0000)
5. Shows life timer of phone (time passes since last start)
*#3370# - Enhanced Full Rate Codec (EFR) activation. Increase signal strength, better
signal reception. It also helps if u wants to use GPRS and the service is not responding or
too slow. Phone battery will drain faster though.
*#3370* - (EFR) deactivation. Phone will automatically restart. Increase battery life by
30% because phone receives fewer signals from network.
*#4720# - Half Rate Codec activation.
*#4720* - Half Rate Codec deactivation. The phone will automatically restart
If you forgot wallet code for Nokia S60 phone, use this code reset: *#7370925538#
Note, your data in the wallet will be erased. Phone will ask you the lock code. Default
lock code is: 12345
Press *#3925538# to delete the contents and code of wallet.
Unlock service provider: Insert sim, turn phone on and press vol up (arrow keys) for 3
seconds, should say pin code. Press C, then press * message should flash, press * again
and 04*pin*pin*pin#
*#7328748263373738# resets security code.
Default security code is 12345
*#06# for checking the IMEI (International Mobile Equipment Identity).
*#7780# reset to factory settings.
*#0000# to view software version.
*#2820# Bluetooth device address.
*#746025625# Sim clock allowed status.
*#62209526# - Display the MAC address of the WLAN adapter. This is available only in
the newer devices that support WLAN
#pw+1234567890+1# Shows if sim have restrictions.
*#92702689# - takes you to a secret menu where you may find some of the information
below:
1. Displays Serial Number.
2. Displays the Month and Year of Manufacture
3. Displays (if there) the date where the phone was purchased (MMYY)
4. Displays the date of the last repair - if found (0000)
5. Shows life timer of phone (time passes since last start)
*#3370# - Enhanced Full Rate Codec (EFR) activation. Increase signal strength, better
signal reception. It also helps if u wants to use GPRS and the service is not responding or
too slow. Phone battery will drain faster though.
*#3370* - (EFR) deactivation. Phone will automatically restart. Increase battery life by
30% because phone receives fewer signals from network.
*#4720# - Half Rate Codec activation.
*#4720* - Half Rate Codec deactivation. The phone will automatically restart
If you forgot wallet code for Nokia S60 phone, use this code reset: *#7370925538#
Note, your data in the wallet will be erased. Phone will ask you the lock code. Default
lock code is: 12345
Press *#3925538# to delete the contents and code of wallet.
Unlock service provider: Insert sim, turn phone on and press vol up (arrow keys) for 3
seconds, should say pin code. Press C, then press * message should flash, press * again
and 04*pin*pin*pin#
*#7328748263373738# resets security code.
Default security code is 12345
Tricks for Nokia Users
Display an image when someone's calling:
Menu > Contacts > "select a contact card" > Options > Edit > Options > Add thumbnail >
"choose an image".
Add a personal ringing tone to a contact:
Menu > Contacts > "select a contact card" > Options > Open > Options > Ringing tone >
"choose a ringing tone".
Menu > Contacts > "select a contact card" > Options > Edit > Options > Add thumbnail >
"choose an image".
Add a personal ringing tone to a contact:
Menu > Contacts > "select a contact card" > Options > Open > Options > Ringing tone >
"choose a ringing tone".
Trick to show your name after time in taskbar
A trick to add up your name in place of AM and PM beside time and make yourself to
feel proud among your group of friends.
It’s simple
Start -> Control Panel -> Regional and Languages option -> Customize (beside English
US) -> Go to TIME tab -> Change AM symbol and PM symbol from AM and PM to your
name -> Apply -> Ok ...
IS it changed??? Might be not ...Now go to time in taskbar and Double Click it to open
"Date and time property" ...Look place where time changes in digital form i.e. 02:47:52
AM , click to arrow to change the AM or PM by selecting and press arrow. It will Show
your name or name that was entered by u, Apply -> OK and be HAPPY
feel proud among your group of friends.
It’s simple
Start -> Control Panel -> Regional and Languages option -> Customize (beside English
US) -> Go to TIME tab -> Change AM symbol and PM symbol from AM and PM to your
name -> Apply -> Ok ...
IS it changed??? Might be not ...Now go to time in taskbar and Double Click it to open
"Date and time property" ...Look place where time changes in digital form i.e. 02:47:52
AM , click to arrow to change the AM or PM by selecting and press arrow. It will Show
your name or name that was entered by u, Apply -> OK and be HAPPY
Playing a Movie in Microsoft paint
Can you play movie on Microsoft paint? Yes u can play movie in paint here is the trick
1) first play movie u want
2)then hit the print screen button on the keyboard
3)when then media files are playing then open paint and paste by pressing ctrl+v (paste
key)
the movie starts on the paint application
1) first play movie u want
2)then hit the print screen button on the keyboard
3)when then media files are playing then open paint and paste by pressing ctrl+v (paste
key)
the movie starts on the paint application
Mouse wheel Trick
Mouse wheel tricks
If you have a mouse with a scroll wheel on it, you can do some cool tricks.......
1.Shift & Spin
Ever wonders what happens when you hold down the Shift key on a web page and spin
the wheel on your wheel mouse? Explorer goes either back or forward, depending on
which direction you spin.
Give it a try. Open up Internet Explorer (or any other browser) and follow a few links.
Then, hold down your SHIFT key and spin that wheel.
2. CTRL & Spin
If you are in a web browser (Explorer or Netscape or Fire fox), hold down your Ctrl key
and spin the wheel. It makes the text larger or smaller depending on which way you spin.
For Opera users, it magnifies both the images and the text
If you have a mouse with a scroll wheel on it, you can do some cool tricks.......
1.Shift & Spin
Ever wonders what happens when you hold down the Shift key on a web page and spin
the wheel on your wheel mouse? Explorer goes either back or forward, depending on
which direction you spin.
Give it a try. Open up Internet Explorer (or any other browser) and follow a few links.
Then, hold down your SHIFT key and spin that wheel.
2. CTRL & Spin
If you are in a web browser (Explorer or Netscape or Fire fox), hold down your Ctrl key
and spin the wheel. It makes the text larger or smaller depending on which way you spin.
For Opera users, it magnifies both the images and the text
How to create shortcut on shutdown and restart buttons on desktop
Many u think to have the shutdown and restart buttons on our desktop. The traditional
way includes going to start button and then choosing the Turn off Computer button and
again choosing between switch users, turn off and restart. It does take a few seconds more
(some times boring). Well there is a solution for it
You can create a Shutdown Button& restart on the desktop.
To create a shutdown and restart button on Desktop we have to create a shortcut. To do
this first
Right Click on the Desktop and then click New Button. Then scroll down to Shortcut. On
clicking it a new Window appears with a blank space saying "Type the location of items".
In this space write "shutdown.exe -s -t 5" or "%windir%\system32\shutdown.exe -s -t 5"
Now the -s stands for shutdown and -t denotes the time in seconds to wait before
windows shutdown. Then click next and give a name as shutdown and click Finish. To
apply icons to it simply Right click it and Properties and then Change Icons. For Restart
simply change -s with -r like this way "%windir%\system32\shutdown.exe -r -t 10" or
"shutdown.exe -r -t 10".
way includes going to start button and then choosing the Turn off Computer button and
again choosing between switch users, turn off and restart. It does take a few seconds more
(some times boring). Well there is a solution for it
You can create a Shutdown Button& restart on the desktop.
To create a shutdown and restart button on Desktop we have to create a shortcut. To do
this first
Right Click on the Desktop and then click New Button. Then scroll down to Shortcut. On
clicking it a new Window appears with a blank space saying "Type the location of items".
In this space write "shutdown.exe -s -t 5" or "%windir%\system32\shutdown.exe -s -t 5"
Now the -s stands for shutdown and -t denotes the time in seconds to wait before
windows shutdown. Then click next and give a name as shutdown and click Finish. To
apply icons to it simply Right click it and Properties and then Change Icons. For Restart
simply change -s with -r like this way "%windir%\system32\shutdown.exe -r -t 10" or
"shutdown.exe -r -t 10".
How to boost the PC faster than it is now
A great new feature in Microsoft Windows XP is the ability to do boot defragmenters.
This places all boot files next to each other on the disk to allow for faster booting.
By default this option is enabled, but on some systems it is not, so below is the
information on how to turn it on:
Go to Start Menu>Run> Type regedit then click ok Find>
"HKEY_LOCAL_MACHINE>SOFTWARE>Microsoft>Dfrg>BootOptimizeFunction"
Select "Enable" from the list on the right Right on it and select "Modify “Change the
value to Y . Reboot your Pc and see the change yourself.
This places all boot files next to each other on the disk to allow for faster booting.
By default this option is enabled, but on some systems it is not, so below is the
information on how to turn it on:
Go to Start Menu>Run> Type regedit then click ok Find>
"HKEY_LOCAL_MACHINE>SOFTWARE>Microsoft>Dfrg>BootOptimizeFunction"
Select "Enable" from the list on the right Right on it and select "Modify “Change the
value to Y . Reboot your Pc and see the change yourself.
How to hide the drives(C: D: E: etc) in your computer
This is a great trick you can play on your friends. To disable the display of local or
networked drives when you click My Computer.
1) Go to start->run. Type regedit.Now go to:
HKEY_CURRENT_USER\Software\Microsoft\Windows\Current Version
\Policies\Explorer
2) Now in the right pane
3) creates a new DWORD item and names it No Drives (it is case sensitive).
4) Now modify its value and set it to 3FFFFFF (Hexadecimal).
Now restart your Computer. So, now when you click on My Computer, no drives will be
shown (all gone...).
To enable display of drives in My Computer, simply delete this DWORD item that you
created. Again restart your Computer. You can now see all the drives again.
networked drives when you click My Computer.
1) Go to start->run. Type regedit.Now go to:
HKEY_CURRENT_USER\Software\Microsoft\Windows\Current Version
\Policies\Explorer
2) Now in the right pane
3) creates a new DWORD item and names it No Drives (it is case sensitive).
4) Now modify its value and set it to 3FFFFFF (Hexadecimal).
Now restart your Computer. So, now when you click on My Computer, no drives will be
shown (all gone...).
To enable display of drives in My Computer, simply delete this DWORD item that you
created. Again restart your Computer. You can now see all the drives again.
Subscribe to:
Posts (Atom)